On Feb 4, logged into system from Boulder to verify the serial numbers of the licors:
port | SN | assumed height |
|---|---|---|
2 | 1163 | 2m. Moved from port 14, 30m on Feb 2 |
7 | 1166 | 7m |
20 (was 17) | 1167 | 16m |
14 | now disconnected |
|
11 | 1164 | 43m |
This agrees with the configuration previous to Feb 2, and the changes of Feb 2: move of the 30m unit (SN1163) to 2m, and the move of the cable from the 16m unit (SN1167) from port 17 to port 20 on the new data system box.
To check the licor serial numbers do:
| No Format |
|---|
adn # shut down data process minicom ttySN # N is port number ctrl-a f # sends break (Outputs (RS232 (EOL "0A0D"))) # enable carriage return in output (Coef ?) # display serial number (Outputs (RS232 (EOL "0A"))) # new-line termination, resume output ctrl-a q # quit minicom aup # restart data process ds # wait 10-15 seconds ctrl-c # verify sampling rates |