...
I also note the METCRAX-II logbook comment: "TRH.40m.rim restarted" where we found that the (bad) data are correctable. My (manual) code to implement this for METCRAXII is at $ISFF/projects/METCRAXII/ISFF/R/fixSHT.qq. It isn't clear that it is worth the effort to implement this fix for the 15 hours of data that are missing during this educational deployment...
If we decide to fix these data, we will need the following coefficients:
Sensor ID3 I2C ADD: 12 data rate: 1 (secs) fan(0) max current: 80 (ma)\n
2015 04 09 15:01:26.7912 0.08542 44 \rresolution: 12 bits 1 sec MOTE: off\r\n
2015 04 09 15:01:26.8472 0.05602 28 calibration coefficients:\r\n
2015 04 09 15:01:26.8755 0.02831 21 Ta0 = -4.112729E+1\r\n
2015 04 09 15:01:26.9047 0.02921 21 Ta1 = 4.153065E-2\r\n
2015 04 09 15:01:26.9348 0.03005 21 Ta2 = -5.198994E-7\r\n
2015 04 09 15:01:26.9555 0.02074 21 Ha0 = -7.871138E+0\r\n
2015 04 09 15:01:26.9848 0.02932 21 Ha1 = 6.237115E-1\r\n
2015 04 09 15:01:27.0148 0.02994 21 Ha2 = -5.446227E-4\r\n
2015 04 09 15:01:27.0348 0.01999 21 Ha3 = 8.683383E-2\r\n
2015 04 09 15:01:27.0648 0.03001 21 Ha4 = 7.886339E-4\r\n
2015 04 09 15:01:27.0947 0.02994 21 Fa0 = 3.222650E-1\r\n