Station is up and sensors reporting, EXCEPT CSAT3A at 20m. Since it doesn't show a sonic head connected (using enter, D shows "SN0000" for the sonic), the fix should be just plugging in the head to the EC100.
More information about rne06:
Ted and Gary staged the sensors yesterday, all except for the Licor since we were missing the boom clamp. Here are the serial numbers:
- Licor 1166
- Nr01 2537
- EC100 1821
- Csat3 1120
- Csat3a 2033
Lessons learned: We should have demonstrated how to connect the Licor and sonics on the ground, before the climbers went up.
After the install Gary checked the data:
- Licor working.
- GPS working.
- CSAT3 at 10m wind and temperature measurements looked good.
- 20m CSAT3A winds are nan, as noted above by Steve.
- NR01 reporting.
- Attached soil mote, I think all the measurements look ok. The mote voltage is only 9-10V.
- The Ubiquiti nanobeam ethernet cable was too short, so Ted decided to move it down 2m from the top to reach the DSM at the usual height.
- The soil bulgin cable barely reaches, so it might be a good idea to string some cord between tower and tree next to mote and hang the cable from that.
...
