...
- unplugged and plugged in USB serial dongle, then restarted NIDAS. Got HRXL going
- did a crude compass boom angle shoot of 237deg magnetic looking into the boom.
DCS:
- replaced TRH housings at 1m, 3m (they didn't have fans!). Now both are working
- reconfigured mote IDs on Rsw.xx.2m and now see data
- lowered TT
- replaced TRH housing at 17m that was working (so data would have been fine, just had been reading too high Rfan). Replacement is normal.
- installed thermocouples at all 3 levels
- closed off spiral cable guides
- raised TT
- connected TC_LOGGER to dcsr, port 6 and changed config (but don't see data yet)
- installed thermocouple connectors at 1, 2, 3m
- installed an actual thermocouple at 3m
- discovered that AC power was off (when Utah started plugging lots of things in). Turned out to be a loose plug at the power panel. Have tried to connect, but don't get a solid "click" when trying to turn. We'll have to keep an eye on this.
...