...
Commands to change the sampling rate:
| Code Block |
|---|
# shut down data system |
...
- adn powers off port 17, power it back on.
eio 17 1
...
adn # adn powers off port 17, power it back on. eio 17 1 # start minicom and turn on local echo (E), line wrap (W) and send a break(F) |
...
# Set bandwidth to 20 and RS232 output frequency to 20: |
...
minicom ttyS17 |
...
ctrl-A e |
...
ctrl-A w |
...
ctrl-A f |
...
(Outputs BW(20) (RS232 (Freq 20.0))) |
...
(Outputs ?) |
...
ctrl-A q |
...
# minicom should now be finished |
...
eio 17 0 |
...
# aup will power it up |
...
aup # wait a bit, then |
...
ds |
...
ctrl-C |
...
# If the 7500 doesn't respond, try power cycling it: |
...
eio 17 0 |
...
eio 17 1 |