...
| Code Block |
|---|
# shut down data systemprocess adn # adn powers off port 17, power it back on. eio 17 1 # start minicom and turn on local echo (E), line wrap (W) and send a break(F) # Set bandwidth to 20 and RS232 output frequency to 20: minicom ttyS17 ctrl-A e ctrl-A w ctrl-A f (Outputs BW(20) (RS232 (Freq 20.0))) (Outputs ?) ctrl-A q # minicom should now be finished eio 17 0 # aupstart data process. This will power up itport up17 aup # wait a bit, then ds ctrl-C # If the 7500 doesn't respond, try power cycling it: eio 17 0 eio 17 1 |