Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Migrated to Confluence 5.3

The following plots were made with our Splus function, plot.tilt, that does a linear least squares fit to find the plane of mean flow, and plots the wind vector elevation angle vs azimuth. The planar fit becomes a sine wave curve on the tilt plot.

See EOL sonic tilt documentation.

From a long term plot of the sonic "diag" value, I chose two periods where the the values were consistently very small. plot.tilt discards 5 minute wind averages when "diag" is above 0.01, or more than 1% of the data has a non-zero CSAT3 diagnostic value.

...

Feb 21 to April 4, 2011

Section
bordertrue
Column

2 meters

Column

7 meters

Column

16 meters

Column

30 meters

Column

43 meters

Aug 5 to Aug 17, 2011

Section
bordertrue
Column

Column

Column

Column

Column

date

height (m)

lean

leanaz

w offset (m/s)

elevation residual rms (deg)

offset residual rms (m/s)

notes

Mar Feb-Apr 2011

2

4.1

-1.7

0.03

2.9

0.04

 

 

7

5.9

8.2

0.07

5.7

0.08

 

 

16

5.9

-0.2

-0.01

3.1

0.011

 

 

30

4.5

-2.1

0.02

2.7

0.014

 

 

43

4.3

-5.9

0.04

3

0.02

 

Aug 2011

2

5.6

-6.3

0.04

2.6

0.03

 

 

7

9.1

-1.4

0.06

7

0.09

large tilt value, too much scatter for good fit

 

16

5.9

4.6

-0.01

3.6

0.01

 

 

30

4.3

-0.9

0.00

3.6

0.01

 

 

43

4.4

-5.5

0.01

4.2

0.02

 

Tom says that typical sag droop of sonic booms results in 1 to 2 degree tilts. And that tilt would be 180 degrees different in azimuth from the above values.The sonic booms point up-slope from the tower, so the approximate 5 degree tilts seen here are a combination of the boom "droop" and the slope of the terrain.

These tilts appear to be due to the slope of the terrain, which is downward in the -u direction, in the direction that the sonic boom points. If the terrain was not sloping, these would indicate a "backwards" boom tilt, i.e. the booms angling upward from the tower. They generally agree on an approximate 5 degree slope tilt of the terrain sonics relative to the sonicsmean flow, except the 9.9 degree tilt for the 7m sonic in Aug 2011.

There appears to be some local "disturbance in the force", causing a pinched effect at 2 meters, and to a lesser extent at 7 meters, so that winds straight into the sonic have an additional downward inclination.

There seems to be good agreement at 16 meters and above between the two fits. I suggest using the average of the two values for those levels. Perhaps we need to look at more data for 2 and 7 meters.

Code Block
languagenone
dpar(start="2011 2 21 00:25",end="2011 4 4 07:26",coords="instrument")
dpar(hts=2)
plot.tilt(flag="diag",ellim=10,spdmin=0.5)