I've just made a flurry of config changes on the dsms to accommodate how things are in the field:

  • Finally got parsing of Sebastian's rad_logger message working – still not sure about the variables, but it is a start.  Changes made on dcst's sensor_catalog.xml
  • Changed all v2.7 motes at PRS to use id numbers.  Set id=90 for the 2 Rsw's, id=91 for the 0.5m Rlw's, id=92 for 2.0m Rlw's, id=93 for 7m Rlw's and id=94 for the 32m Rlw's.  Appropriate changes made to cfact.xml on prsg and prst.  I think this is the way we will want to operate throughout this project.

It would be great if someone would push/pull these changes back to github. 

  • No labels

1 Comment

  1. Steve Oncley AUTHOR

    Note that Dan power-cycled prst to get the Victron running, but we seemed to lose the ability to ssh in the process.  ("connection refused").  Data are flowing to barolo (ds works) and dashboard run locally at the site works.

    P.S. About 10min after I wrote this, prst came back.  I had waited until :36 after the hour, but it didn't work until after :48