You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Packing:

- Still need to take soil cores: bring oven/scales/soil install kit (buy a second oven and scales for trailer?)

- Replace gas can (cheapo Walmart can's spout broke)

Sensors:

- two serializers became noisy.  Need to replace or get rid of.

- Rsw.in.flr died for a while?

- Vpile.off apparently has -1 LSB = -31uV.  .xml limits should allow this.

- One TRH fan wired backwards.  Need to check past data from this sensor and double-check all fans.

- One TRHs had 0.1C bias.  Pretty good for all this stuff.

- SPN1 isn't perfect.  Sent note to manufacturer.

- Qsoil response not normal in this soil.  Need manual calibration.  What should the strategy be here?  I actually liked having a test plot near the base.  In any case, soil quite dry during most IOPs.

Power:

- ISS was happy with the solar trailer

- Still don't understand mote diodes.  Having a diode between charger board and battery caused failures.  Had no failures with diode removed.

Computer:

- Netgear WiFi needed to be reset many times.  Changing channel and orientation helped, but problem still there.  Toss?

- APS UPS battery dead.

- Trailer AC caused computer issues -- everyone complained that it was warm during the late afternoon.

- would have been nice to have check_usb.sh/check_ap24.sh feed a Nagios display.

- Need to change RIP color from background!

- Can we force a browser to auto-reload plots?

- xchat was good to have, though died when 4G went out

- Could/should we have set up 4G failure to fall-back to HughesNet?

- R is great!  Needs more work (derived; stns=0)

Infrastructure:

- Bird diverters fell off

Tear-down issues:

- unconnected serial cable to 20m.near is bad

- unconnected RJ45 cable on rim is bad.

- let's get GPS positions for flr rad stand and soils

  • No labels