Noticed that some Ifans were 0:
tse13.80m: wouldn't respond to control-R, but came back up with a power cycle (pio)
tse13.2m: responds to control-R, but immediately fan is 0. I tried increasing the current limit to 200mA, and still is immediately 0. I suspect this is the VERTEX fan-monitoring-board-dead issue.
tse06.60m: responds to control-R, but immediately fan is 0. I tried increasing the current limit to 200mA, and still is immediately 0. I suspect this is the VERTEX fan-monitoring-board-dead issue.
tse09.100m: wouldn't respond to control-R, but came back up with a power cycle (pio)