Dan, Tony, Chris took the day off. Steve and Gary visited DCS for a couple of hours in the morning. Then we were in meetings...
DCS:
- Attached rad logger cable, but didn't work. 2 days earlier, I saw -5V on the logger's pin2 of the D9, but I didn't see this at the DSM end on the Bulgin (on any pin). I <could> see -5V on pin3 of the D9 from the DSM. Has to be something simple. I also am not sure of the baud rate or the data rate (1/min?), but using minicom I didn't even see garbage after 2min.
- Installed batteries and power board in the job box.
- Powered up all of the DSMs (though not together due to power cabling). The only issue was the fan not working on TRH.1m.
- Gary reconfigured the modems and we set "rfkill unblock wifi" on each DSM, so both cell and wifi connections should work.
- Found that the V2.7 mote connected to the Rsw's had its power switch off, so turned it on. Also saw that the data output was in "ascii-ish" with mp=1. Changed to mp=0 (the standard Wisard format)