Jun 9 15:30 MDT
Since Friday, Jun 3 the four systems have been setup in the cal lab. In order to get cellular signal, external cellular antennas are mounted in the window, at a spacing of about 4 feet apart.
The bulk of the sensors were added on Monday, Jun 6.
Fixed several issues
- loose RS232 connection on Licor 7500 (serial number ?)
- apparent loose power connection (screw terminal near DSM circuit breaker) on ncar4 causing sporadic reboots
- fix loose RS232 connection on prop vane (serial number ?)
Cellular comms are not great. Using a browser to look at the router web page, shows that the cellular signals are good (70 - 80 %), but the throughput is not great - probably because they are interfering with each other. The connection to ncar2 and ncar4 has been the worst. Chris also noticed that their modems seem hotter to the touch.
Copying files with rsync was problematic. It worked well from 1 and 3, not so good from 2 and terrible from 4.
rsync from 4 showed about 3-4 kB/sec, and the copying of a file would generally fail after 15 minutes or so with a timeout error, even though the rsync timeout was set to 600 seconds.
So, I shut down modems 1-3 and then the rsync connection to 4 started working well, 40 kB/sec with no timeouts. So it seems that the cellular comm problems are related to the fact that the transmissions are interfering.
Would be nice to be able to test the systems at spacings more similar to what they will be in the field (or at least some thing like 50'). We'll see if that can be done.