As part of teardown, we took a core sample yesterday 21 June, at 3pm:

Tin: 21.21g (tin #2)

Wet: 98.24g

We set up the sample for 1–4 cm depth

We'll bring the sample back to Boulder tomorrow for the dry weighing.

We couldn't figure out how to log into the "d" DSM using our phones.  We did reconnect it (with a mote) and ran it for about 30min off the battery backup, so there should be a tiny bit of data on d's USB stick.  If for some reason this didn't work (we couldn't monitor it), we could just use the reading from the day before when the DSM was running normally.