...
In the ongoing quest to get beautiful vertical profiles, we have extended the 7m boom away from the trailer tower, arguing that blockage by the tower might reduce the measured winds (even upstream). Mack brought out some booms that had been used with the scaffolding towers that are a bit bigger, longer, and stiffer. After reviewing several options this morning, we came up with the Mack "V". It required a bit of hole drilling, but nothing major. We found enough hardware to assemble everything (using 6 clamps at one level on the tt). The tower was down from about 11 am to 5pm1225-1730. We were a bit delayed by a poorly-seated D15 connector on the nano. Note that U-bolts now holding the EC-100 need to be loosened in order to open the EC100 box (done to avoid stretching cables). Before extending back up, we also releveled the trailer that seemed to be a bit off.
Also unplugged t38's Victron from about 10:30 to 14:30 1000 to 1455 to help diagnose t38's low-voltage issues.
...