I think I've (finally!) gotten this right...
As allocated in the config is based on the changes I made earlier today, when we thought we had more CSAT3Bs and fewer CSAT3As than we actually do.
CSAT3:
At M2HATS:
21. One has a short cable, just about exactly the length of the boom, so we'd need to figure out a way to mount the electronics box closer than just on the tower.
Allocated in the config:
20
CSAT3A/EC150:
At M2HATS:
24 CSAT3As, 24 EC150/EC100s already built as combination booms and already mounted on towers, or at least staged
3 new-style CSAT3A heads (2 in CSAT3B boxes) and 3 old-style CSAT3A heads, all still in trailer
1 EC100 box in trailer (no Nano), plus 2 EC100 boxes (and EC150s?) currently en route to the site.
Steve says there are 2 more EC100/EC150s at EOL. One has a bad sonic connector so we can't use, other has no nano (which wouldn't be a problem for this use)
Allocated in config:
24 CSAT3A/EC150 combination booms
4 CSAT3A + EC100 (no EC150) booms
CSAT3B, CSAT3BH:
At M2HATS:
7 CSAT3Bs and 1 CSAT3BH currently in trailer.
1 more CSAT3B en route to the site. It will need to be configured.
Allocated in the config:
9
So, once the shipment from EOL gets here, we will have exactly 58 usable sonics (including the CSAT3B that needs to be set up and the CSAT3 with a short cable).
Depending on which is easier to deal with (different mount for CSAT3 box vs. setting up new CSAT3B), I could change one more CSAT3B in the config to a CSAT3.