...
- Today, swapped ports 5&6 to get the soil/snow motes right
- Today, also moved TS036 (10cm) from the "snow" to the "soil" mote
- Found that the Tsoil that I read as TS17 is reporting as TS47. Have just updated the config on "d", but not elsewhere yet.
- Apogee now mounted and reporting
- no no apogee or Tsnows yet
ue:
- had to pio cycle 3 to get the nano to report
- Gary saw error flags on the 3m EC100. All looks okay now, though the co2 levels are quite low – maybe nidas limit checking was setting flags
- Apogee now mounted and reporting
- no apogee or Tsnows yet
uw:
- no NR01 (wetness) yet
- Apogee now mounted and reporting
- no apogee or Tsnows yet
c:
- cl, cu, ct are mounted and may be powered on, power and network cables connected, but not yet on the network
- cm is not mounted yet
- running
- cb, cl, cm mounted and running
- no TRHs from 1–10m yetmounted and running
- snow nanos not yet connected (but nanos are mountedno inlets set up)
- no flowcapts mounted, but not yet connected (need code to handle 2 such USB devices in one DSM)
- 4 no snow pillows yet (3 pillows are now in place, but electronics two responding and two not yet connected)
- Apogee now mounted and reporting
- no apogee or Tsnows yetTsnows yet
- need to figure out if sonic or EC150 should be mounted at 1.5m
Other:
- where to add webcam?
- add NR01 & wetness to qctables
- add second Victron to cl